Brocade Communications Systems WFT-2D User Manual page 1187

2. Change the fabric view by selecting a different fabric from the Fabric list.
3. Define a new flow by selecting Flow > Add.
4. Clear the flow statistics by selecting the flow that you want to reset and selecting Flow > Reset.
5. Delete a flow by selecting the flow that you want to delete and selecting Flow > Delete.
6. Configure a MAPS monitor for a flow by selecting the flow and selecting Flow > MAPS >
7.
8. Customize the payload and pattern for a Generator flow by selecting the Generator flow and
Brocade Network Advisor SAN User Manual
53-1003154-01
TABLE 93
Flows Definitions table fields and components (Continued)
Field and components
Destination
Destination Info
Ingress Port
Egress Port
Source Fabric ID
Destination Fabric ID
LUN
Bi-Directional
Flow Definition Persistence Whether the flow is configured to persist over switch reboots (yes) or not (no).
Size
Pattern
Mirror Port
Note that the fabric must contain at least one Flow Vision-capable device.
For step-by-step instructions, refer to
"Creating a Flow Generator flow definition"
definition" on page 1191".
For step-by-step instructions, refer to
For step-by-step instructions, refer to
Configure.
For step-by-step instructions, refer to
View MAPS viloations for a flow by selecting the flow and selecting Flow > MAPS > Violations.
For step-by-step instructions, refer to
selecting Feature > Generator > Configure.
For step-by-step instructions, refer to
Description
The port number of the destination device defined in the flow definition. An *
(asterisk) indicates learned flows.
The icon and name for the destination device. The device name is a hyperlink.
Click to launch the device property sheet.
This field is empty if the destination device is not defined in the flow definition.
The ingress port defined in the flow definition. The port name is a hyperlink.
Click to launch the port property sheet. A yellow icon indicates a bottlenecked
port. Refer to "SAN port icons"
The egress port defined in the flow definition. The port name is a hyperlink.
Click to launch the port property sheet. A yellow icon indicates a bottlenecked
port. Refer to "SAN port icons"
The fabric identifier of the source defined in the flow definition.
The fabric identifier of the destination defined in the flow definition.
Any LUN values defined in the flow definition.
Whether the flow is bidirectional (yes) or not (no).
The payload size defined in the flow.
The payload pattern defined in the flow.
The mirror port identifier defined in the flow definition.
"Creating a Flow Monitor flow definition"
on page 1181", or
"Resetting flow statistics"
"Deleting flows"
"Configuring a MAPS policy"
"Viewing MAPS violations"
"Customizing Flow Generator flows"
Flow Vision flows
on page 366" for details.
on page 366" for details.
"Creating a Flow Mirror flow
on page 1136".
on page 1137".
on page 1353".
on page 1374".
on page 1183".
29
on page 1140",
1135