Displaying Fcip Performance Graphs; Displaying Performance Graphs For Fc Ports; Displaying Fcip Performance Graphs For Ethernet Ports - Brocade Communications Systems WFT-2D User Manual

4. Select Delete.
5. For tunnels with multiple circuits, select additional circuits from the table to delete and select
6. Click OK to delete the circuit(s).

Displaying FCIP performance graphs

You can display performance graphs by clicking the Performance button on the FCIP Tunnels dialog
box. You can also display performance graphs from Properties, as described in the following
sections.

Displaying performance graphs for FC ports

1. Right-click a blade an Extension Blade or Switch from the Fabric Tree structure or Connectivity
2. Select the Port tab.
3. Select FC from the Type drop-down list.
4. Click Performance > Real Time Graph.

Displaying FCIP performance graphs for Ethernet ports

1. Right-click a blade an Extension Blade or Switch from the Fabric Tree structure or Connectivity
2. Select the Port tab.
3. Select GigE from the Type drop-down list.
4. Click Performance > Real Time Graph.
Brocade Network Advisor SAN User Manual
53-1003154-01
Delete after each selection.
Map, and select Properties.
Map, and select Properties.
Displaying FCIP performance graphs
22
979