Brocade Communications Systems WFT-2D User Manual page 667

4. Configure the policies for the Edit Switch dialog box tabs, which are described in the following
5. When you have finished configuring the policies, apply the settings to the switch.
6. Click OK.
7.
8. Click Start on the Deployment Status dialog box to save the changes to the selected devices.
9. Click Close to close the Deployment Status dialog box.
Brocade Network Advisor SAN User Manual
53-1003154-01
FIGURE 235
Edit Switch dialog box
sections:
•
"QoS configuration" on page 620
•
"FCoE provisioning" on page 626
•
"VLAN classifier configuration"
•
"LLDP-DCBX configuration"
•
"802.1x authentication"
NOTE
Clicking Cancel when there are pending changes launches a pop-up dialog box.
The Deploy to Products dialog box displays.
Click OK after changing the attributes of the current deployment.
The Deployment Status dialog box launches.
on page 628
on page 632
on page 636
16
DCB configuration
615