Speed Dial - System - NEC Electra Elite 48/192 Features And Specifications Manual

Speed Dial - System

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
Features and Specifications Manual
Attendant Positions can be used to program either 80 or 1000 System Speed
Dial memories that provide shared access by all stations. Selection may be
set per Class to override System Speed Dial.
When 80 system speed dial buffers are allowed, each station user also has 20
station speed dial buffers.
System Software S4000 or higher permits input stored characters to be
entered on the dial pad, but does not allow the Character Code Table to
be used.
Terminal Type:
All Multiline Terminals
Required Components:
None
To program the System Speed Dial buffer using the Attendant
Position:
T
1. Press .
Q
2. Press .
3. Dial the Speed Dial buffer number to be programmed (use
K K G I
~
4. Dial the Trunk or Trunk Group Access Code (maximum four digits).
5. Dial the desired telephone number.
K K K I I I
~
or
A-12
) .
S - 39