Attendant Positions - NEC Electra Elite 48/192 Features And Specifications Manual

Attendant Positions

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
Any number of stations can be designated an Attendant Position. These
stations have access to distinct Attendant-type features.
Positions can support two Attendant Add-On Consoles each. Programming
for Attendant features such as setting Night Mode and System Speed Dial
memory apply.
Terminal Type:
Any Multiline Terminal with display programmed as an Attendant Position
Required Components:
None
Provided under specific Attendant feature descriptions.
Data Assignment:
Use Memory Block 4-17 (Station to Class of Service Feature
¥
Assignment) to assign the first two station ports, 01 and 02, as Attendant
Positions.
Use Memory Block 1-8-07 [Class of Service (Attendant) Feature
¥
Selection 1] Page 1 LK8 to allow (LED On) or deny (LED Off) attendant
features to any station.
Restrictions:
A maximum of four Attendant Add-On Consoles can be assigned to one
¥
Attendant Position.
A maximum of four Attendant Add-On Consoles can be assigned in the
¥
system.
Up to four Attendant positions can have an Attendant Add-on Console.
¥
A-13
Two Attendant
A - 39