NEC Electra Elite 48/192 Features And Specifications Manual page 176

Electra Elite
Features and Specifications Manual
When more than one of the same type of calls are received at a
¥
station, the following Call Pickup priorities are used by the system:
• Ordinary Incoming CO/PBX Calls
After the first call is picked up, the lowest numbered CO/PBX
Trunks are picked up (i.e., when a call is received on Trunks 01
and 02, Trunk 01 is picked up first).
• Calls on SIE/CAR keys
First In/First Out
• DIT, DID, VRS/Automated Attendant Transfer Calls
First In/First Out
• Ring Transferred CO/PBX Call
After the first call is picked up, the lowest numbered CO/PBX
Trunks are picked up (i.e., when a call is received on Trunks 01
and 02, Trunk 01 is picked up first).
• Recalls
After the first internal call is picked up, the lowest numbered
CO/PBX Trunks are picked up (i.e., when a call is received on
Trunks 01 and 02, Trunk 01 is picked up first).
CAR/SIE incoming calls are answered by dialing the station number
¥
where the CAR/SIE call is ringing.
The Call Pickup Direct Access Code can be programmed on a
¥
Feature Access key or One-Touch key.
SMDR prints the Call Pickup originating station number.
¥
Call Pickup Direct is allowed between different tenants.
¥
A station that does not have the CO/PBX line key or an available
¥
CAP key cannot pick up the ringing outside line from the ringing
station.
Issue 6
C - 57