Automatic Route Selection (Ars - NEC Electra Elite 48/192 Features And Specifications Manual

Automatic Route Selection (ARS)

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
Automatic Route Selection (ARS) allows an outgoing line to be seized using a
Trunk Group or Route Advance Block (RAB) for each number dialed by the
user. The ARS feature allows more efficient use of the trunks connected to the
system.
System Software S4000 or higher is required.
Terminal Type:
All Multiline Terminals
Required Components:
None
To use this feature:
1. Lift the handset, and wait for dial tone.
2. Dial ARS access code
3. Dial the desired number.
Data Assignments
Use Memory Block 1-1-46~48 [Access Code (1-, 2-, or 3-Digit)
¥
Assignment] (Function No. 101) to assign an access code.
Use Memory Block 3-03 (Trunk-to-Trunk Group Assignment) to make
¥
Trunk-to-Trunk Group Assignment.
Use Memory Block 4-40 (LCR Class Selection) to specify the LCR Class
¥
(default: 0) for each station.
Use Memory Block 1-8-08 [Class of Service (Station) Feature Selection
¥
2] Page 6 LK1 to program Trunk Groups 2~32 to Allow (LED On) or
Deny (default: LED Off) ARS Bypass.
A-25
I
(default) and receive LCR dial tone.
A - 77