Speed Dial - Station - NEC Electra Elite 48/192 Features And Specifications Manual

Speed Dial - Station

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
Features and Specifications Manual
When 100-memory allocation is specified, each station in the system can be
assigned 20 Station Speed Dial buffers. Each Station Speed Dial buffer may
contain 24 digits or four other buffer numbers (Nesting Dial) and the called
party name. The ETW-16DD-1/2(BK)/(SW) TEL has 20 One-Touch keys, the
ETW-24DS-1/2(BK)/(SW) TEL has 12 One-Touch keys, the DTP/DTU-32-
1(BK)/(WH) TEL, DTP-32D-1(BK)/(WH) TEL, and DTU-32D-2(BK)/(WH) TEL
have 16 One-Touch keys that can also be used for Speed Dial. The One-
Touch key buffer may contain a maximum of 16 digits with no characters for
names.
Using System Software S5000 or above, a maximum of 16 Feature
Access keys per station can be programmed on unused line keys. These
keys can be used for station speed dialing in addition to the 20 station speed
dial buffers.
System Software S4000 or higher permits input stored characters to be
entered on the dial pad, but does not allow the Character Code Table to
be used.
Terminal Type:
All Multiline Terminals
Required Components:
None
To program a Station Speed Dial buffer using a Multiline
Terminal:
T
1. Press .
Q
2. Press .
3. Dial the Station Speed Dial buffer number to be programmed
H K I I
~
(
4. Dial the Trunk or Trunk Group Access Code (maximum four digits).
S-10
) .
S - 25