Call Alert Notification - NEC Electra Elite 48/192 Features And Specifications Manual

Call Alert Notification

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
Features and Specifications Manual
Call Alert Notification allows a station user to receive an alert tone, flashing
ICM, Large LED, and LCD identification during an incoming call while the user
station is busy. This allows the station user to put the current call on hold to
answer a second call to increase call handling abilities.
This feature works with Call Forward - Busy/No Answer so the second
incoming call is queued to the station for eight seconds (default) before it is
forwarded.
Terminal Type:
All Multiline Terminals
Required Components:
None
To answer an incoming DIT, DID, Tie line, or Automated
Attendant transferred call on a Multiline Terminal, after receiving
a Call Alert Notification while talking with another party:
U
1. Press . The first call is put on hold.
2. Incoming caller is automatically connected.
To answer the incoming call on any station (single-line station in
particular), after receiving a Call Alert Notification while talking
with another party:
1. Go on-hook on the first call.
2. Go off-hook to answer the incoming call.
C-1
C - 1