NEC Electra Elite 48/192 Features And Specifications Manual page 51

Issue 6
SERVICE
CONDITIONS
A - 30
To call a station:
1. Lift the handset, and wait for internal dial tone.
2. Press the DSS/BLF key for the desired station. Hear ringback
tone or voice announce the station.
3. Called party answers.
To set/cancel Message Waiting or Station Outgoing Lockout
(Outgoing Restrict) to station:
1. Press the Message Wait or Station Lockout key.
2. Press the DSS/BLF key for the desired station.
To make an outgoing call using the Attendant Add-On Console
from the Attendant Position:
1. Go off-hook with the handset or press a CO line key on the
Attendant Add-On Console.
2. Dial the desired number.
To answer an incoming call using the Attendant Add-On Console
from the Attendant Position:
Press the incoming CO line key or flashing
Data Assignment:
Use Memory Block 1-8-07 [Class of Service (Attendant) Feature
¥
Selection 1] Page 1 LK8 to Allow (default: LED On) or Deny (LED Off)
attendant features.
use Memory Block 1-6-01 (Attendant Add-On Console to Telephone
¥
Port Assignment) to assign Attendant Add-on Console to a telephone
port number (default: port 01 or 02).
Use Memory Block 1-6-03 (DSS Call Voice/Tone Signal Selection) to
¥
specify whether VOICE (default) or TONE signaling is used first
when an Attendant makes a call using the Attendant Add-On
Console.
Electra Elite
O
if ringing is assigned.
Attendant Add-On Console