Digit Insertion - NEC Electra Elite 48/192 Features And Specifications Manual

Digit Insertion

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
Digit Insertion provides user friendly operation when the system is installed
behind a PBX or Centrex Central Office. When a system user originates an
outgoing call, the system automatically inserts the PBX/Centrex Trunk Access
Code. This feature saves the user from dialing an additional Access Code.
Terminal Type:
All Multiline Terminals
Required Components:
None
To make a call using Digit Insertion:
1. Lift the handset, and wait for internal dial tone.
2. Dial the Trunk Access Code, then dial the desired telephone number.
Data Assignment:
Use Memory Blocks 1-1-46~48 [Access code (1-, 2-, or 3-Digit)
¥
Assignment] to assign a 1, 2, or 3-digit Trunk Access Code.
Use Memory Block 1-1-50 (CO/PBX Outgoing Digit Add Assignment) to
¥
specify up to 10 additional digits when a trunk in the trunk group or route
advance block assigned in Memory Block 1-1-49 (Networking Trunk
Group/Route Advance Assignment) is seized, and a number is dialed.
General:
The Trunk Access Code of the Electra Elite should be the same number
¥
as the Trunk Access Code of the PBX/Centrex.
An outside call by Digit Insertion feature complies with Code Restriction.
¥
Digit Insertion can be assigned per Trunk group.
¥
Digit Insertion can be assigned to a maximum of 16 Trunk groups.
¥
D-6
D - 13