Recall Key - NEC Electra Elite 48/192 Features And Specifications Manual

Recall Key

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
The Recall Key either generates a hookflash to access features provided by
the outside exchange or abandons a call while retaining the CO/PBX line for
another call. Each Multiline Terminal has a Recall key. The function of this key
is programmed.
Terminal Type:
All Multiline Terminals
Required Components:
None
To use this feature with an outside CO call in progress:
S
1. Press .
2. Receive new CO dial tone; line is not released.
To use this feature with a PBX/Centrex call in progress:
S
1. Press .
2. Receive PBX/Centrex second dial tone.
Data Assignment:
Use Memory Block 1-1-02 (Hookflash Time Selection) to assign the
¥
hookflash time (default: 600 milliseconds) system-wide.
A hookflash can be programmed as any digit in a Speed Dial buffer.
¥
Use Memory Block 1-3-02 (SLT Hookflash Signal Selection) to allow
¥
Single Line Telephones to generate a hookflash (FLASH) on a CO/PBX
line system-wide. Default is HOLD.
R-1
R- 1