External Tone Ringer - NEC Electra Elite 48/192 Features And Specifications Manual

External Tone Ringer

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
The External Tone Ringer provides a common audible tone with relay contacts
for control when incoming CO/PBX calls are received in Day or Night Mode.
The relay contact closures may be used for external bells or chimes. When an
Attendant is not available, station users may respond to the external ring and
answer incoming calls. This feature provides for wide area coverage or loud
ringing for noisy locations where incoming CO/PBX calls are answered.
Terminal Type:
Not applicable
Required Components:
ECR-U10 ETU for common audible and control relays
None
Data Assignment:
Use Memory Block 1-7-07 (External Ring Delay Pattern Selection) to
¥
assign each External Tone Ringer control circuit to one of five distinctive
ringing patterns (default: Pattern 3), including continuous ring.
¥ Use Memory Block 2-08 (ECR Relay to Tenant Assignment) to assign an
External Tone Ringer control relay to a tenant to control tone generation.
¥ Use Memory Block 7-1 (Card Interface Slot Assignment) to specify the
ECR-U10 ETU.
Restrictions:
A maximum of four relays are programmable for External Tone Ringer
¥
control.
Tie lines, DIT/ANA calls, and DID trunks do not activate the External
¥
Tone Ringer control relays.
E-10
E - 35