Co/Pbx, Tie Line Digitrestriction - NEC Electra Elite 48/192 Features And Specifications Manual

CO/PBX, Tie Line
Digit Restriction
FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
CO/PBX, Tie Line Digit Restriction eliminates unauthorized calls by restricting
the number of digits that can be dialed from a station on an outside line.
Terminal Type:
All stations
Required Components:
None
None
Data Assignment:
Use Memory Block 4-32 (Trunk Digit Restriction) to specify the maximum
¥
number of digits per station that can be dialed while on any outside line
(default: 00, No Limit).
¥ Use Memory Block 1-1-69 (Tie Line Code Restriction Assignment) to
assign YS before this feature works on Tie Lines.
¥ When Class Selection is set to YS using Memory Block 1-1-62 (System
Speed Dial Override by Class Selection), CO/PBX, Tie Line Digit
Restriction is not applied.
Restrictions:
¥ Code Restriction must be assigned to the station before this feature is
used.
¥ Single Line Telephone users cannot be restricted by CO/PBX, Tie Line
Digit Counting after the PBR is released because the DTMF dial signals
are sent to the outside line from the Single Line Telephone.
C-20
C - 77