NEC Electra Elite 48/192 Features And Specifications Manual page 151

Issue 6
RELATED FEATURES
LIST
C - 32
Setting, canceling or Call Forwarding is allowed only when logged
¥
out of ACD.
General:
When a station with Call Forward assigned receives a second call,
¥
and Call Forward is set to a busy station, the second incoming call
does not follow the forwarding assignment until the forwarding station
becomes idle.
A line key defined as Call Forward - All Call set/cancel lights when
¥
Call Forward - All Call is set. The Feature key LED flashes when Call
Forward - All Call is set.
All internal and transferred calls to the station follow the Call
¥
Forward - All Call setting.
Tie/DID and DIT/ANA line calls follow Call Forward - All Call setting.
¥
A station can be the destination of any number of Call Forward - All
¥
Call settings.
When the station user sets this feature, the associated red LED
¥
winks on any DSS/BLF key assigned for that station.
The destination station is the only station that can call a station with
¥
Call Forward - All Call set.
Call Forward - All Call has higher priority than any combination of Call
¥
Forward - Busy/No Answer.
Secondary Incoming Extensions cannot be set for Call Forward - All
¥
Call.
When Call Forward - All Call is set, an indication is not displayed in
¥
the LCD of the display Multiline Terminal where Call Forward - All Call
was set.
When a station is logged in an as ACD agent and Call Forward-Busy/
¥
No Answer is set, any non-ACD call transferred or ringing to that
station follows the Call Forward setting. System software S5000 or
higher is required.
Feature
Number
C-8
C-11
C-12
Feature Name
Call Forward - Busy/No Answer
Call Forward – Off-Premise
Call Forward - Split
Electra Elite
Call Forward - All Call