NEC Electra Elite 48/192 Features And Specifications Manual page 73

Issue 6
A - 52
7. Record Message.
8. Go on-hook.
To set the Automated Attendant /Delay Message Mode from the
Attendant Position:
T
1. Press
H A
2. Dial
3. Dial the incoming trunk number (
indicates All CO/PBX lines.
Note: Dialing 00 sets or cancels the Automated Attendant mode for all trunks when
the trunks are idle. A trunk that is busy when 00 is dialed is not set. To set the
T
Automated Attendant to a busy trunk, dial the individual trunk number.
4. Press
To cancel the Automated Attendant /Delay Message Mode from
the Attendant Position:
T
1. Press .
H B
2. Dial
3. Dial the incoming trunk number (
indicates All CO/PBX lines.
Note: Dialing 00 sets or cancels the Automated Attendant mode for all trunks when
the trunks are idle. A trunk that is busy when 00 is dialed is not set. To set the
T
Automated Attendant to a busy trunk, dial the individual trunk number.
4. Press .
To answer by One Level:
1. Receive an incoming CO/PBX call.
2. The Automatic Answer with Delay Message answers the call and
sends a greeting.
3. The outside party hears ringback tone or MOH (System
Programmed).
.
.
K K
.
.
K K
Automatic Answer with Delay Message
Electra Elite
F D K K
~ ) .
F D K K
~ ) .