NEC Electra Elite 48/192 Features And Specifications Manual page 52

Electra Elite
Features and Specifications Manual
Restrictions:
Only four DCU-60-1(BK)/(WH) Consoles or EDW-48-1/2(BK)/(SW)
¥
DSS/BLFs can be installed per system.
Only four Attendant Add-On Consoles can be connected to one
¥
station.
When tone signaling is selected in Memory Block 1-6-03 (DSS Call
¥
Voice/Tone Signal Selection), the called party cannot answer
handsfree unless the DSS station dials 1 to switch to voice.
General:
The 48 DSS keys and 12 function keys on Attendant Add-On
¥
Consoles are flexible and can be changed.
Both DSS/BLF for stations and CO lines can appear on the same
¥
DCU-60-1(BK)/(WH) Console or EDW-48-1/2(BK)/(SW) DSS/BLF.
When the Attendant transfers a call, the transferred outside line
¥
remains on Non-Exclusive Hold until the call is answered.
Each installed Attendant Add-On Console is included in the
¥
maximum number of stations.
The keys are assigned at default as follows:
¥
Key(s):
01~48 ICM Call
49 Night Mode
50~53 Direct Paging Access
54 Vacant
55 Message
56~59 External All Zone Paging
60 Transfer
Busy Lamp Field indications show when a Multiline Terminal, outside
¥
line, or zone paging is in use.
00~147 (depending on system
configuration)
Internal Zone and All Zone Page
External Zone and All Zone Page
Issue 6
A - 31