NEC Electra Elite 48/192 Features And Specifications Manual page 182

Electra Elite
Features and Specifications Manual
Use Memory Block 3-42 (DIT Assignment) to assign Day Mode direct
¥
trunk termination to a station.
Use Memory Block 3-43 (ANA Assignment) to assign Night Mode
¥
trunk termination to a station.
Use Memory Block 1-2-22 (Call Forward - No Answer Time
¥
Selection) to specify the Call Forward - Busy/No Answer time.
Restrictions:
Each system must have a Voice Mail Quick Transfer Master Hunt
¥
number assigned, but Voice Mail Call Back Indication is not
supported in the system without Voice Mail.
The Closed Numbering Network is required to support Centralized
¥
Voice
<<BlueText>$paranum><<BlueText>$paranum>
Numbering Network
All systems in the Closed Numbering Network using the same Voice
¥
Mail must assign the same Access codes for Memory Block
1-1-46~48, Functions 502 and 503, to set or cancel message
indication.
Systems without Voice Mail can access DIT/ANA trunks to the
¥
Automated Attendant of the Centralized Voice Mail using a CAR key
that has Call Forward–Off-Premise to the Voice Mail pilot.
Soft key indication is not supported in remote systems. Refer to
¥
Features Supported by Digital Voice Mail
supported features.
Analog voice cannot be used to support Centralized Voice Mail.
¥
General:
The Voice Mail system controls the Voice Mail Message Indication for
¥
systems without Voice Mail using Analog or Digital Tie Lines.
Centralized Voice Mail does not require upgrade of the Digital Voice
¥
Mail System.
When using multiple systems in a network, Internal/External Pad
¥
Selection may need adjustment to compensate for volume loss.
Using Multiple Call forwarding to transfer calls between systems is
¥
not recommended.
Mail.
in this Manual for details.
Issue 6
Refer to
U-3 Uniform
for a detailed list of
C - 63