Flexible Line Assignment - NEC Electra Elite 48/192 Features And Specifications Manual

Flexible Line Assignment

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
Each Multiline Terminal has complete flexibility of line key assignments to
meet individual needs. Functions can be programmed on Flexible Line Keys,
including DSS numbers and a variety of Feature Access Codes to simplify the
use of these functions. Outside line appearances and Secondary Incoming
Extensions can also be assigned to Flexible Line keys.
Terminal Type:
All Multiline Terminals
Required Components:
None
None
Data Assignment:
Use Memory Block 2-05 (Line Key Selection) to select TNAT (Tenant
¥
Mode) or TEL (Telephone Mode). Default is TEL.
Use Memory Block 2-06 (Line Key Selection for Tenant Mode) to assign
¥
functions to each telephone in Tenant Mode. Default is CO.
Use Memory Block 4-12 (Line Key Selection for Telephone Mode), to
¥
assign functions to each telephone in Telephone Mode. Default is CO.
Use Memory Block 4-50 (Multiline Terminal Type Selection) to assign a
¥
DTU terminal with 16 (default) or 24 line keys.
General:
Each Flexible Line key can be assigned one of the following options:
¥
• NON (not assigned)
• CO Outside Lines (01~64)
• Trunk Groups (01~32)
F-3
F - 7