Speed Dial Stored Characters - NEC Electra Elite 48/192 Features And Specifications Manual

Speed Dial Stored Characters

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
Features and Specifications Manual
Speed Dial buffers may contain 24 digits. When 100-memories (80 System
Speed Dial buffers and 20 Station Speed dial buffers) are allocated, a
maximum of 13 characters can be entered for the name.
memories are allocated, a maximum of 12 characters can be entered for the
name.
System Software S4000 or higher permits input stored characters to be
entered on the dial pad, but does not allow the Character Code Table to
be used.
Terminal Type:
All Display Multiline Terminals
Required Components:
None
To program a Station Speed Dial buffer with stored characters:
T
1. Press .
Q
2. Press .
3. Dial the Station Speed Dial buffer number to be programmed
H K I I
~
(
4. Dial the Trunk or Trunk Group Access Code (maximum four digits).
5. Dial the desired telephone number.
U
6. Press , and enter name using the Character Code Table.
7. Use the dial pad to enter the name.

R efer to S-11 Speed Dial Stored
T
8. Press .
S-11
) .
- OR -
Characters.
When 1000-
S - 31