Step Call - NEC Electra Elite 48/192 Features And Specifications Manual

Step Call

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
A caller that receives a call waiting tone during an internal call can dial 2
(default) to access the next higher station number in the same 10s group (e.g.,
10~19, 20~29, or 110~119).
Terminal Type:
All Multiline Terminals
Required Components:
None
After calling a station and receiving a call waiting tone:
B
1. Dial ( set at default).
2. The next higher available station number is called.
After attempting to System Call Park call in a busy location and
receiving busy tone (e.g., System Call Park locations 0 and 1 are
busy, and an attempt is made to park in location 0):
A
1. Dial , and receive busy.
B
2. Dial ; call is parked in park location 2.
Data Assignment:
Use Memory Block 1-2-24 (Intercom Feature Access Code Assignment)
¥
to assign the Access Code (Default: 2) for Step Call.
General:
Step Call operation can be performed only while a call waiting tone is
¥
heard.
S-19
S - 63