Add-On Conference - NEC Electra Elite 48/192 Features And Specifications Manual

Add-On Conference

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
Features and Specifications Manual
Add-On Conference allows a conference call with a total of four parties with
various combinations of outside lines and stations. This increases efficiency by
allowing multiple parties to enter a conversation.
System Software S3000 or lower supports up to six, 4-party conferences
with no more than two outside lines per conference.
System Software S4000 or higher supports up to 16, 4-party conferences
with no more than two outside lines per conference.
Terminal Type:
All stations
Required Components:
None
To initiate an Add-On Conference using a Multiline Terminal with
a call in progress:
R
1. Press .
2. Dial a station number or outside party, and inform the answering party
of the conference.
R
3. Press again. The
parties.
4. Repeat steps 1~3 to add an additional party to the conference.
To initiate an Add-On Conference using a Single Line Telephone
with a call in progress:
1. Press the hookswitch to place the first call on hold.
2. Dial an internal station and announce conference.
3. Press the hookswitch again. Talk with both parties.
R
LED is on continuously. Talk with both
A-3
A - 9