Stored Hookflash - NEC Electra Elite 48/192 Features And Specifications Manual

Stored Hookflash

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
Features and Specifications Manual
Stored Hookflash allows any Multiline Terminal user to store a hookflash in a
Speed Dial buffer to allow one-step access to certain Centrex or PBX features.
System Software S4000 or higher permits input stored characters to be
entered on the dial pad, but does not allow the Character Code Table to
be used.
Terminal Type:
All Multiline Terminals
Required Components:
None
To program a Hookflash in Feature Access key programmed for
Speed Dial:
T
1. Press .
Q
2. Press .
3. Press the Feature Access key.
K
4. Dial .
5. Dial the Trunk or Trunk Group Access Code (maximum four digits).
S
6. Press to enter a hookflash.
7. Dial the desired telephone number.
U
8. Press , and enter name using the Character Code Table.
9. Use the dial pad to enter the name.

R efer to S-11 Speed Dial Stored
T
10. Press .
S-21
- OR -
Characters.
S - 67