Incoming Trunk Name Or Numberdisplay - NEC Electra Elite 48/192 Features And Specifications Manual

Incoming Trunk Name or
Number Display
FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
Incoming Trunk Name or Number Display allows names or numbers to be
assigned to each trunk of the system. These names or numbers appear on
the Multiline Terminal LCD when receiving an incoming call.
System Software S2000 or higher is required for the Incoming Trunk
Name feature.
Terminal Type:
Any Multiline Terminal with LCD
Any TAPI Terminal
Required Components:
None
None
Data Assignment:
Use Memory Block 3-00 (Trunk Name/Number Assignment) to specify
¥
the Name or Number for accommodated CO/PBX lines for display when
the line is seized or during an incoming call.
Use Memory Block 4-l8 (Station Name Assignment) to assign names to
¥
telephone stations.
Use Memory Block 3-53 (Caller Name Indication Selection) to select TRK
¥
to enable the incoming trunk Name display function.
Restrictions:
This display function is not available for ICM calls.
¥
I-2
I - 3