Pushbutton Dial - Dtmf Or Dp - NEC Electra Elite 48/192 Features And Specifications Manual

Pushbutton Dial - DTMF or DP

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
Pushbutton Dial - DTMF or DP is provided on all Single Line Telephones and
outside lines. Tie Lines are assigned per trunk to generate either Dual-Tone
Multifrequency (DTMF) or Dial Pulse (DP) dialing signals.
Terminal Type:
All Multiline Terminals with a push button dial pad
Required Components:
TLI(2)-U10 ETU
None
Data Assignment:
Use Memory Block 7-1 (Card Interface Slot Assignment) to specify the
¥
TLI(2)-U10 ETU.
General
DTMF or DP programming is per Tie line trunk.
¥
Single Line Telephones that are installed can be Push Button DTMF or
¥
DP (rotary dial).
Default assigns DTMF signaling to all trunks and Single Line Telephone
¥
ports.
DTMF tone can be sent from Multiline Terminals to Dial Pulse trunks.
¥
Loop Start/Ground Start trunks are DTMF only.
¥
P-11
P - 25