Key Function/Multifunction
Registration
FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
The system can be registered as either a Key Function (KF) or a Multifunction
(MF) telephone system. This feature is set by a switch on the CPUB( )-U10
ETU for the Electra Elite 192 system or on the MBD-U10 Unit in the B48-U10
KSU for the Electra Elite 48 system during installation.
Terminal Type:
Not applicable
Required Components:
CPUB( )-U10 ETU (Electra Elite 192)
B48-U10 KSU (Electra Elite 48)
None
General:
When the system is set as KF, CO/PBX lines must appear on Multiline
¥
Terminals. Outside calls cannot be made by dialing a Trunk Access
Code from internal dial tone except when specified trunk seizure is used.
When a system is set as KF, the following CO/PBX calls are prohibited:
¥
•
Route Advance key
•
Trunk Group key
•
Hot Line/Prime Line with Automatic Trunk Selection
•
Trunk Group Access Call, Route Advance Access Call
•
Least Cost Routing (LCR)
•
Speed Dial with Automatic Trunk Selection
•
Last Number Redial with Automatic Trunk Selection
K-1
K - 1