NEC Electra Elite 48/192 Features And Specifications Manual page 295

Issue 6
D - 86
1. Lift the Handset from the Base Unit.
2. Press Talk key.
3. The Talk/Batt.low LED flashes then lights continuously to indicate
an established communication path between the Handset and the
Base unit and dial tone is generated.
4. Dial the number.
5. Talk to the party.
6. When finished, press the Talk key or place Handset back in the
Base unit to disconnect the call.
To make a call with Auto Talk On:
1. Lift the Handset from the Base Unit.
2. The Talk/Batt.low LED flashes then lights continuously to indicate
established communication path between the Handset and the
Base unit and dial tone is generated.
3. Dial the number.
4. Talk to the party.
5. When finished, press the Talk key or place Handset back in the
Base unit to disconnect the call.
To Hold a call in progress at the Base unit:
1. Press Hold and return the Handset to the Base unit.
2. To return to the held party press the flashing green line key and
press Talk or pick up the Handset.
Note: After a programmed time the held call recalls to the originating terminal.
Electra Elite
term
D ® Handset Cordless