NEC Electra Elite 48/192 Features And Specifications Manual page 509

Issue 6
SERVICE CONDITIONS
S - 4
V
2. Press the
numbers listed in the directory.
Press a dial pad key (to select the first letter of the name or
number of the desired speed dial buffer) and dial
3. To dial the number press
4. Enter the Account Code.
Data Assignment:
Use Memory Block 1-1-18 (System Speed Dial Restriction by
¥
Tenant) to specify whether or not System Speed dial is restricted for
tenants. (Default: 00, unrestricted).
Use Memory Block 1-1-33 (Speed Dial Number/Name Display
¥
Selection) to specify whether the dialed number (default: DIAL) or
NAME is displayed first on the LCD when an outgoing call is made
using speed dial.
Use Memory Block 1-1-35 (Speed Dial Buffer Allocation) to select
¥
either the 100-memory (default) or 1000-memory speed dial buffer
allocation.
Use Memory Block 2-07 (System Speed Dial Display Assignment) to
¥
specify whether (LED On) or not (LED Off) confirmation of Speed
Dial numbers and messages stored in Speed Dial memory is allowed
(100-memory default: All Page 1 LEDs On).
Restrictions:
Scrolling Directories can be used only while the station is idle.
¥
When the System Speed Dial Display Assignment is used to restrict
¥
Tenants from viewing the numbers stored in System Speed Dial
buffers, the scrolling follows these conditions:
• When both Name and Number are stored, the user can scroll
System Speed Dial buffers.
• When only the Number is stored, the user cannot scroll System
Speed Dial buffers.
When System or Station Speed Dial data is stored or changed by PC
¥
Programming, the changes are not displayed by the scrolling feature
until the PC Programming connection is released.
( UP or DOWN Softkey) to view the names/
- OR -
P
or lift the handset.
Electra Elite
J
.
Scrolling Directories