Music On Hold - NEC Electra Elite 48/192 Features And Specifications Manual

Music on Hold

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
A locally provided music source or an internal music source can be used to
supply music to parties on hold, to assure them that they are still connected to
the system.
System Software S4000 or higher is required to allow CO ports to
provide multiple music sources to different COs in the system.
Terminal Type:
Not applicable
Required Components:
External source connected to the RCA jack on the basic B64-U10 KSU or
MOH jack on the MBD-U10 Unit in the B48-U10 KSU.
None
Data Assignment:
Use Memory Block 1-8-09 (Music on Hold Pattern Selection) to select
¥
the Music on Hold pattern (default: A).
Use Memory Block 1-8-31 (Hold Tone Source Assignment) to assign the
¥
internal (default: INT) or external (EXT) Music on Hold source.
Use Memory Block 1-8-32 (Hold Interval Tone Volume Selection) to pad
¥
the Music (default: 0 dB) by -6dB when the Internal source is used.
General:
Music On Hold (MOH) is provided for all outside and internal calls on
¥
hold.
Music On Hold can be disabled if required.
¥
M-7
M - 15