Attendant Add-On Console - NEC Electra Elite 48/192 Features And Specifications Manual

Attendant Add-On Console

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
Features and Specifications Manual
The Attendant Add-On Console functions with a Multiline Terminal
programmed as an Attendant. This console provides access to a maximum of
48 stations and/or outside lines. The Busy Lamp Field status is shown by a red
LED for each station or trunk. Trunks can include CO/PBX, ISDN, DID, E&M
Tie Lines, and FT1 lines. The Attendant Add-On Console also has 12 function
keys that can be used for attendant messaging, paging access, or other
undefined functions.
Terminal Type:
Any Multiline Terminal programmed as an Attendant Position
Required Components:
DCU-60-1(BK)/(WH) Console or EDW-48-1/2(BK)/(SW) DSS/BLF
To transfer a call:
1. Attendant answers an incoming CO/PBX call.
2. Press the DSS/BLF key for the desired station. The calling party is
put on Non-Exclusive Hold.
3. When the called party answers the Attendant call, the Attendant
announces the call and then presses
Add-On Console.
4. Go on-hook.
1. Attendant answers an incoming CO/PBX call.
2. Press the Attendant Add-On Console key for the desired station. The
calling party is put on Non-Exclusive Hold.
N
3. Press on the Add-On Console.
4. Go on-hook.
A-11
N
- OR -
on the Attendant
A - 29