Recall With Station Identification - NEC Electra Elite 48/192 Features And Specifications Manual

Recall With Station
Identification
FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Features and Specifications Manual
A transferred, held, or camped-on call that is not answered in a specified time,
recalls. During the recall, the Multiline Terminal display shows the station
number that is recalling and the station that did not answer.
Terminal Type:
Any Multiline Terminal with LCD
Required Components:
None
Using a Multiline Terminal with LCD:
1. The Multiline Terminal user answers a CO/PBX incoming call.
N
2. Press , and dial the desired station number.
3. Go on-hook.
4. After the timeout, when the call has not been answered, the recall
tone is received and the CO/PBX line key LED intermittently winks.
The station number where the call was transferred to is indicated in
the LCD.
5. Press the intermittently winking line key, and go off-hook to answer
the recall.
Data Assignment:
Use Memory Block 1-1-03 [Hold Recall Time Selection (Non-Exclusive
¥
Hold)] to specify recall time (default: 25 seconds) for Non-Exclusive hold.
Use Memory Block 1-1-12 (Station Transfer/Camp-On Recall Time
¥
Selection) to specify recall time (default: 45 seconds) for Station
Transfer/Camp-On.
R-2
R- 5