Show Page; On / Off; Shutter Open / Closed; Freeze / Un-Freeze - Digital Projection TITAN SX+ 3D, DUAL 3D ULTRA CONTRAST User Manual
Hide thumbs
Also See for TITAN SX+ 3D, DUAL 3D ULTRA CONTRAST:
- User manual (160 pages) ,
- Manual (27 pages)
Table of Contents
Advertisement
For important information about how Input 8 is used, see
5. Userware
Show page
The Show page is the first to display when the browser connects to the projector.
•
To return to the Show page at any time, click on Show.
On / Off
•
Click On to switch the projector On.
•
Click Off to switch the projector into Standby mode.
Shutter Open / Closed
•
Click on Shutter Open to open the shutter.
•
Click on Shutter Close to close the shutter.
Freeze / Un-Freeze
•
Click on Freeze to freeze the display on the current frame.
•
Click on Un-Freeze to un-freeze the display.
Picture sliders
•
Use the sliders to adjust the Brightness, Contrast, Saturation, Hue and
Sharpness of the display.
•
Click on the number above the slider to return to the default value.
Page 5.6
INPUT 8 in the Notes column
TITAN sx+ 3D, Dual 3D, Ultra Contrast
Digital Projection
, and also Section 4, Overview.
Picture
sliders
The Freeze function is NOT
available for Input 8.
User Manual
Notes
Rev C April 2011
Advertisement
Table of Contents
Need help?
Do you have a question about the TITAN SX+ 3D, DUAL 3D ULTRA CONTRAST and is the answer not in the manual?