Verilink WANsuite 5260 Reference Manual page 93

Figure 3.50
Endpoint Endpoint name (or Interface) through which to send the IP packet to reach the
defined IP Address. The default is the LAN.
IP Address The IP address of the unit for which you want to define the MAC address.
MAC Address The MAC address of the host to be reached.
ARP Status Displays whether this static ARP is enabled or disabled.
The Static ARP Table screen provides the following user-activated buttons:
Button
ARP Details
Dynamic ARP Table
Add New
Refresh
ARP Details Screen
Access this screen by clicking on the ARP Details button on the ARP Table
screen.
Figure 3.51
Endpoint Endpoint name (or Interface) through which to send the IP packet to reach the
defined IP Address. Currently, this is always the LAN.
ARP Table Screen
Function
Displays details of ARP tables.
Displays the dynamically learned MAC <-> IP address.
Adds a new static ARP.
Refreshes data on the current page.
ARP Details Screen
W e b S e r v e r I n t e r f a c e 3-63