Table of Contents
Advertisement
RIP Enable
RIP Trust Neighbors
RIP Interval
RIP Domain
OSPF Enable
OSPF Router ID
3-56
W A N s u i t e 5 2 6 0 / 5 2 3 0
Figure 3.44
IP Gateway Screen
RIP Parameters
Globally enables RIP 1, RIP 2, or No RIP.
Values: Disable, Enable RIP1, Enable RIP2
Default: Enable
Globally enables the trusted neighbors feature. If there is a list of trusted
neighbors in an IP Gateway, only RIP packets coming from those trusted
neighbors will be used to build the internal routing table.
Values: Enable, Disable
Default: Enable
Interval for RIP packet to be sent. Default is 30 seconds.
Value representing the RIP domain. Default is 0.
OSPF Parameters
Globally enables OSPF.
Values: Disable, Enable
Default: Disable
This 32-bit number assigned to each router running the OSPF protocol
uniquely identifies the router within an Autonomous System. Each router
requires a unique router ID. Default is the LAN IP address of the unit.
Advertisement
Table of Contents
