Verilink WANsuite 5260 Reference Manual page 56

Round Trip Delay Size
Round Trip Delay Rate
Active
LMI Type
FrameStart Status
Rx Invalid Threshold
Rx Invalid Alarm
Tx Threshold
Tx Alarm
Rx Threshold
Rx Alarm
3-26 W A N s u i t e 5 2 6 0 / 5 2 3 0
Specifies the frame size (in bytes) of packets making the round-trip.
Specifies the rate (in seconds) at which Round Trip Delay packets are sent.
Status and Alarms Table
The table displayed at the bottom of the Frame Relay Service Details screen
reports on the status and condition of LMI parameters and on Receive/
Transmit alarms and thresholds. Alarm threshold levels may be changed by
entering a new threshold value in the appropriate field of the table and
clicking the "Submit" button. Table fields are describe below.
Read-only field shows whether or not (No or Yes) an alarm is active.
Read-only status indicates ANSI, CCITT, LMI rev. 1, or Unknown.
Read-only status indicates Sourcing, Monitoring, or 0.
Number of invalid frames received during a 15-minute interval after which an
invalid alarm will be triggered. Default of "0" disables this alarm.
Status of this alarm indicates OK or Alarmed.
Number of bits per second sent during a 15-minute interval after which a Tx
alarm will be triggered. Default of 0 disables this alarm.
Status of this alarm indicates OK or Alarmed.
Number of bits per second sent during a 15-minute interval after which an Rx
alarm will be triggered. Default of 0 disables this alarm.
Status of this alarm indicates OK or Alarmed.
The Frame Relay Details screen provides the user-activated buttons described
in the following table:
Button
Submit
Frame Relay Statistics Opens the Frame Relay Statistics screen for the current
DLCI Table
Clear Alarms
Refresh
NOTICE:
When a "Submit" command is executed, the frame relay link will be re-
initialized with the new parameters, causing a brief interruption in data
transfer.
Function
Sets any values that have been changed.
Frame Relay service.
Opens the DLCI Table screen, which displays all the DLCIs
on the current service. Refer to DLCI Table Screen on
page 3-44 for more information.
Clears all Frame Relay alarms.
Refreshes data on the current page.