Verilink WANsuite 5260 Reference Manual page 91

Endpoint
Target IP Address
Target IP Mask
Next Hop IP Address:
Cost
Route Status
Figure 3.48 Route Details Screen
Endpoint name (or interface) through which to send the IP packet to reach the
Target IP Address.
Represents the target network that you want this router to reach.
Values: 0.0.0.0−255.255.255.255
Default: 0.0.0.0
Mask of the target network.
Values: 0.0.0.0−255.255.255.255
Default: 0.0.0.0
NOTICE:
Setting the Target IP Address and Target IP Mask to 0.0.0.0 defines
THE default route for this unit.
IP address of the next device in the route.
Cost of using that route.
Values: 0−65535
Default: 1
Indicates whether or not the current route is enabled.
Values: Enable, Disable
Default: Enable
The Route Details screen provides the following user-activated buttons:
Button
Submit
Static Route Table
Delete Route
Refresh
Function
Sets any values that have been changed.
Returns you to the previous screen.
Deletes the route currently displayed.
Refreshes data on the current page.
W e b S e r v e r I n t e r f a c e 3-61