Table of Contents
Advertisement
Message Size
Idle Character Delay
Input Terminator
Data Direction
Maximum number of characters to buffer before sending a frame.
Values: 0−1024
Default: 256
Maximum number of idle character time to wait before sending a frame.
Values: 0−65535
Default: 10
Character that terminates a message before sending a frame.
Values: 0−255
Default: 0
Data direction that the port will support. If set to "Input," the port will only
accept incoming data and will not transmit data. If set to "Output," the port
will ignore any incoming data. If set to "Both," the port will process all data.
Values: Input, Output, Both
Default: Both
The table below these parameters displays the SCADA statistics.
The SCADA Details screen provides the following user-activated buttons:
Button
Submit
SCADA Device List
Clear Stats
Refresh
Figure 3.22
SCADA Device List Screen
Click the "SCADA Device Details" button to access a menu (Figure 3.23)
that lets you map SCADA devices to endpoints.
Function
Sets any values that have been changed.
Displays a menu that shows the mapping between
SCADA devices and endpoints (Figure 3.22).
Clears all SCADA statistics.
Refreshes data on the current page.
W e b S e r v e r I n t e r f a c e
3-29
Advertisement
Table of Contents
