Verilink WANsuite 5260 Reference Manual page 61

Wansuite 5260; wansuite 5230
Table of Contents

Advertisement

MRU
The Maximum Receive Units configuration option may be set to inform the
peer that the implementation can receive larger packets, or to request that the
peer send smaller packets.
Port IP Address
The IP Address of the port. For unnumbered PPP link, set to 0.0.0.0 and set
IP Address Negotiation to "No."
Peer IP Address
The IP address of the peer that will negotiate authentication protocols.
Virtual PPP over
Endpoint name over which to send PPP encapsulated data (i.e., PPP over
Frame Relay). Valid only when the PPP interface is Virtual.
Auth Challenge
The time interval (in seconds) between CHAP challenges. A value of "0"
Interval
(zero) disables the periodic authentication challenge.
Allow PAP
Lets the peer negotiate for PAP.
Allow CHAP
Lets the peer negotiate for CHAP.
PAP Username
Type the appropriate PAP Username in this field to log on to the peer.
PAP Password
Enter the password necessary to log on to the peer under a given PAP
Username.
CHAP Username
Type the appropriate CHAP Hostname in this field to challenge the peer.
CHAP Secret
Enter the Secret (i.e., password) necessary to challenge the peer.
Values: 128–4096
Default: 1500
Default: 192.168.1.2
Default: 192.168.1.3
Values: 0−3600
Default: 0 (disabled)
Values: No, Yes
Default: No
Values: No, Yes
Default: No
Values: User established
Default: Username
Values: User established
Default: None
Values: User established
Default: Hostname
Values: User established
Default: Secret
W e b S e r v e r I n t e r f a c e
3-31

Advertisement

Table of Contents
loading

Related Products for Verilink WANsuite 5260

This manual is also suitable for:

Wansuite 5230

Table of Contents