Power Failure - Verilink WANsuite 5260 Reference Manual

1-12 W A N s u i t e 5 2 6 0 / 5 2 3 0
Figure 1.4 WANsuite 5260/5230 Power Supply Unit
When power is applied to the unit, the front panel indicators flash for
approximately 10 to 15 seconds as the unit initializes. The green
LED on the front panel will remain illuminated as long as the unit receives
power. This LED turns amber when the unit is in test mode.
CAUTION:
Always plug the external power supply into a grounded power outlet.
NOTICE:
Per UL 1950 and CSA 950 Clause 1.7.2, if the power supply cord is
intended to serve as a disconnect device, an easily accessible socket
must be installed near the equipment.

Power Failure

If the indicator does not illuminate, check the power connections and the
primary AC circuit breaker.
The WANsuite 5260/5230 provides nonvolatile memory retention of the unit
configuration in case of a power failure. This feature allows the unit to
automatically restore normal service and retain pre-existing time and date
information following a power loss.
POWER