Table of Contents
Advertisement
"Disable" will override an "Enable" parameter set under "Filter Non Local
Address" on the NAT Details menu.
Type
Defines whether this port is local or global. Default is LAN global. All others
are local.
IP Address
IP Address of this port. Default is the value defined in the IP Gateway Circuit
Table.
Mask
Mask related to the defined IP Address. Default is the value defined in the IP
Gateway Circuit Table.
Endpoint
The Endpoint name of the circuit associated with the LAN or WAN port.
Default is LAN for the first port.
The "Add New" prompt lets the user add additional ports.
Figure 4.66
The NAT Port Details screen provides the following user-activated prompts:
Prompt
Delete
Status
The NAT Port Status screen shown below displays for each port the processed
packets from specific IP addresses.
NAT Port Details Screen
Function
Deletes the specified NAT Port.
Displays the NAT Port Status screen (Figure 4.67).
V T 1 0 0 I n t e r f a c e
4-73
Advertisement
Table of Contents
