Network Config Screens - Verilink WANsuite 5260 Reference Manual

Network Config Screens

Figure 4.6 WANsuite 5260 Interfaces Screen
From the WANsuite 5260 Interfaces screen, you may choose from the
following: Network 1, Network 2, Serial 1, Serial 2, Ethernet, or Supervisory.
From the WANsuite 5230 Interfaces screen, you may choose from the
following: Network, Serial, Ethernet, or Supervisory.
Figure 4.7 WANsuite 5230 Interfaces Screen
The WANsuite 5260 Network 1 and Network 2 (Figure 4.8) Config screens
and WANsuite 5230 Network Config screen let you view and make changes
to the Network interfaces' configuration as described below. In addition, the
screens provide a table that displays the alarm values for the Network
interfaces. On the WANsuite 5260, the Network 1 and 2 Config screens are
the same except that at the top of the Network 2 Config screen, there is an
additional parameter, "Function," that's described, along with the other screen
parameters, below.
V T 1 0 0 I n t e r f a c e 4-7