Table of Contents
Advertisement
Configuration Menu
5-12
W A N s u i t e 5 2 6 0 / 5 2 3 0
The Configuration menu lets you configure the parameters of the various
interfaces.
Figure 5.11
WANsuite 5260 Configuration Menu Tree
TCP/IP Config
Net 1 Config
Figure 5.12
WANsuite 5230 Configuration Menu Tree
TCP/IP Config
TCP/IP Configuration Menu
The TCP/IP CONFIG menu lets you configure the unit's IP parameters. Use
the
button to display the desired configuration parameter, and then
SCROLL
press the
button to activate the configuration function.
SELECT
Figure 5.13
TCP/IP Configuration Menu Tree
IP Address
xxx.xxx.xxx.xx
IP Address
This menu lets assign a unique network address to this unit.
To establish an IP Address, press the
cursor over the first digit's location (an "x") in the address to indicate that the
value is selected for change. Press the
change the selected digit's value (0–9). When the desired value for a selected
portion of the address is displayed, press the
and to move to the next value in the address. Pressing the
while the blinking cursor is on the last digit enters the value and returns to the
previous screen. Pressing the
address aborts the edit.
Configuration
Net 2 Config
Serial 1 Config
Configuration
Net Config
TCP/IP Config
Subnet Mask
Gateway Address
xxx.xxx.xxx.xx
xxx.xxx.xxx.xx
button to activate a blinking
SELECT
SCROLL
SELECT
button at any time while entering an IP
EXIT
Serial 2 Config
Supv Config
Serial Config
DHCP Client
Dis
En
button to incrementally
button to set that value
button
SELECT
Advertisement
Table of Contents
