Table of Contents
Advertisement
IP Service Details Screen
Figure 4.28
SCADA Device List
Press "Enter" after selecting the device number to display the SCADA Device
Details (Figure 4.29) menu that lets you map SCADA devices to endpoints.
Figure 4.29
SCADA Device Details
The IP Service Details screen (Figure 4.12), accessed by selecting "IP" from
the <Type> column in the IP Service screen, lets you configure the IP
parameters described on page 4-16.
To change any of the available parameters, you must enter new values in the
appropriate field(s) and press the "Esc" key to save your changes.
NOTICE:
To use newly established IP parameters, you must "Save and Restart."
(See "Save and Restart" on page 4-6.)
V T 1 0 0 I n t e r f a c e
4-35
Advertisement
Table of Contents
