Table of Contents
Advertisement
routes. After building the routing tables, WANsuite periodically broadcasts the
contents to neighboring routers so that your network can choose the most
efficient routes available.
OSPF uses link-state routing algorithms to calculate routes based on the
number of routers, transmission speeds, delays, and route costs. Using the
OSPF protocol, WANsuite works with other routers in your
telecommunications fabric to dynamically change routing "on the fly" to make
use of the most efficient and cost-effective transit across your network.
Because IP Gateway enables WANsuite to route IP traffic either statically or
dynamically across your LAN/WAN architecture, your need for costly routers
is substantially reduced. WANsuite is a one-stop solution that can help you
meet the requirements of your many different applications.
DHCP uses a server-client architecture to assign IP addresses to PCs and
workstations on the LAN. The DHCP server dynamically assigns these IP
addresses, which can be either temporary or permanent, to each PC or
workstation (DHCP client). These IP addresses are "housed" on the DHCP
server. The flexibility to reassign IP addresses saves the end user money by
eliminating the need for a single IP address for each piece of equipment on
the LAN.
NAT enables an enterprise to set up two sets of IP addresses − one set for
internal network use (or LAN traffic) and one set for external use (or Internet
traffic). This can provide a layer of security for a company by eliminating
outside access to internal IP addresses from the Internet.
The WANsuite 5260/5230 gives service providers and enterprise customers
the capability to monitor end-to-end network performance (with support of
up to 256 virtual circuits) as well as the capability to verify Service Level
Agreements (SLAs); isolate performance problems to the LAN, local loop, or
frame relay network; determine appropriate bandwidth needs; and monitor
network trends to aid in future capacity planning.
All of WANsuite 5260/5230's installation, performance configuration, traffic
monitoring, alarm reporting, and diagnostic capabilities can be configured
through the unit's embedded Web server interface (WANsight™) using
®
Microsoft
Internet Explorer™. The Web server interface can be accessed
locally through the Ethernet port or the Supervisory port, or remotely through
a Network port. Especially advantageous is WANsuite's advanced
monitoring and control capability that gives network administrators the
ability to plan future capacity requirements. To extend the WANsuite
5260/5230's functionality even further, Verilink offers an element
management software system for reporting and real-time diagnostics.
The unit's built-in ServiceAware™ technology lets network managers
maximize available WAN bandwidth and verify SLAs. This management
platform lets the end user see network activity (performance) and problems
(diagnostics) on any permanent virtual circuit (PVC), access line, or physical
circuit.
1-2
W A N s u i t e 5 2 6 0 / 5 2 3 0
Advertisement
Table of Contents
