Table of Contents
Advertisement
Network 1 (5260) or Network (5230) Interface
Network 2 Interface (5260 Only)
Line Rate:
2.048 Mbps (±50 bps) unframed
Line Framing:
CAS, CCS, or 2 Mbits unframed
Line Code:
AMI or HDB3
E1, +1 to − 27 dB
Input Signal:
BNC jack at 75 Ω (±10 %), RJ-48 jack at 120 Ω (±10 %)
Connection:
3.0 V (± 10 %) base-peak into 75 or 120 Ω with protection
Output Signal:
Transient Voltage:
1000 V protection, fused input/output
Jitter Control:
per G.823 Sections 2.1 and 3.0
Timing Source:
5260: With "Function" parameter on Network 2 screen in
Slave mode, options are Internal, Network 1, Network 2,
Serial 1, Serial 2
With "Function" parameter on Network 2 screen in Network
mode, options are Internal, Network 1, Serial 1
5230: Internal, Network, Serial
Ones Density:
HDB3, alternate fill; complies with G.701 and G.703
Line Rate:
2.048 Mbps (±50 bps) unframed
Line Framing:
CAS, CCS, or 2 Mbits unframed
Line Code:
AMI or HDB3
E1, +1 to − 27 dB (ALBO)
Input Signal:
BNC jack at 75 Ω (±10 %), RJ48 jack at 120 Ω (±10 %)
Connection:
3.0 V (± 10 %) base-peak into 75 or 120 Ω with protection
Output Signal:
Transient Voltage:
1000 V protection, fused input/output
Jitter Control:
per G.823 Sections 2.1 and 3.0
Timing Source:
With "Function" parameter in Slave mode, timing parameter
is ignored
With "Function" parameter in Network mode, options are
Internal, Network 2, Serial 2
Ones Density:
HDB3, alternate fill; complies with G.701 and G.703
A
P P E N D I X
S
PECIFICATIONS
A
A
PPENDIX
S p e c i f i c a t i o n s
A
A-1
Advertisement
Table of Contents
