Verilink WANsuite 5260 Reference Manual page 108

Wansuite 5260; wansuite 5230
Table of Contents

Advertisement

TTL
Service Type
Lease Time
Primary DNS IP Addr
Secondary DNS IP
Addr
Domain Name
Router IP Addr
Primary DNS IP Addr
Secondary DNS IP
Addr
3-78
W A N s u i t e 5 2 6 0 / 5 2 3 0
Time to Live for any DHCP packet. Default is 64.
Type of Service used by the DHCP Server packet. Default is 1.
Tells the DHCP client the number of seconds it can retain this IP address. The
client should make a new DHCP request within the specified amount of time
to ensure the IP address is not given to another PC. Default is 600 seconds.
If requested by DHCP client, the client then uses this address to resolve
names of IP addresses. Default is 0.0.0.0.
If requested by DHCP client, the client then uses this secondary address to
resolve names of IP addresses. Default is 0.0.0.0.
Domain name to be used by all DHCP clients. Default is user's server.
IP address that all clients use for Gateway or Router. Default is 0.0.0.0.
If requested by DHCP client, the client then uses this address to resolve
names of IP addresses. Default is 0.0.0.0.
If requested by DHCP client, the client then uses this secondary address to
resolve names of IP addresses. Default is 0.0.0.0.
The DHCP Server Details screen provides the following user-activated
buttons:
Button
Submit
Host Table
Static Entry Table
IP Address List Table
IP Address Status
Table
Refresh
DHCP Hosts Screen
In some cases, it may be necessary to provide an IP station with a specific
DHCP server name, which may be used by the IP station when making a
DHCP request. That name is included on the DHCP Hosts screen (Figure
3.69), which identifies the DHCP server sending DHCP packets. This
parameter is configured on the DHCP Hosts Details screen accessed by
clicking on an "Index" number.
Function
Sets any values that have been changed.
Lists Host names (DHCP server identification).
Creates a list of static IP addresses associated with MAC
addresses.
Defines the addresses available for DHCP clients.
Displays DHCP Server statistics.
Refreshes data on the current page.

Advertisement

Table of Contents
loading

Related Products for Verilink WANsuite 5260

This manual is also suitable for:

Wansuite 5230

Table of Contents