Verilink WANsuite 5260 Reference Manual page 33

Figure 3.1 Unit Screen
The Unit screen displays the following fields:
Field Function
Object ID Display-only field used to point an SNMP agent to this ID.
Up Time Displays the amount of time the unit has been up and running.
Contact Stores the name of a point-of-contact for system failure.
Name Read/write field that holds the unit's name.
Location Read/write field that holds the unit's location.
FrameStart ID Read/write field that holds the unit's ID that uniquely identifies
the unit and is used in the FrameStart applications.
Three Blank Read/write fields for user-specific labels and values. Information
Fields resides in non-volatile memory.
Time Read/write field that holds the unit's internal time setting in
standard 24-hour HH:MM:SS format.
Date Read/write field that holds the unit's internal date setting in
standard MM/DD/YY format.
The Unit screen provides the following user-activated buttons:
Button Function
Submit Sets any values that have been changed. Use the top "Submit"
button to set any unit parameters changed in the upper section
of the screen, and the lower "Submit" button to set the real-
time clock.
Maintenance Reset Brings up a screen where you can reset unit to its default TDM
or Packet, Packet 3, or Packet 4 configuration.
W e b S e r v e r I n t e r f a c e 3-3