Verilink WANsuite 5260 Reference Manual page 110

Host Name
Start
End
Subnet Mask
Exclude Start
Exclude End
3-80 W A N s u i t e 5 2 6 0 / 5 2 3 0
Name given to the DHCP client.
The Static Entries screen provides the following user-activated buttons:
Button Function
DHCP Returns the user to the previous screen.
Details
Add New Lets the user add an additional Static Entry.
Refresh Refreshes data on the current page.
IP Address List Screen
The IP Address List screen (Figure 3.4) displays the "pool" of addresses
available for DHCP clients. These parameters are configured on the IP
Address List Details screen accessed by clicking on an "Index" number.
Figure 3.71 IP Address List
Starting IP Address of the DHCP client pool.
Ending IP Address of the DHCP client pool.
Subnet Mask associated with the defined range.
Beginning of "excluded" range.
End of "excluded" range.
The IP Address List screen provides the following user-activated buttons:
Button Function
DHCP Returns the user to the previous screen.
Details
Add New Lets the user add an additional IP address.
Refresh Refreshes data on the current page.
IP Address Status Screen
The IP Address Status screen (Figure 3.72) displays a list of all current DHCP
clients.