Save and Restart
Interfaces Screen
4-6
W A N s u i t e 5 2 6 0 / 5 2 3 0
Figure 4.5
Confirmation Screen
NOTICE:
Performing a "Maintenance Reset" or a "Save and Restart" will
terminate communications with the unit. Refresh (by pressing
"Ctrl+U") after approximately 10 seconds to restore communications.
Selecting "Save and Restart" will display a confirmation menu similar to the
one shown in Figure 4.5. Select "yes" to save the current configuration
settings and proceed with the restart.
The WANsuite 5260 Interfaces screen in Figure 4.6 and the WANsuite 5230
Interfaces screen shown in Figure 4.7 list all the units' available interfaces.