Format
Flow Control
Character Size
Parity
Stop Bit
Current Pin Status
Ethernet (IP Details) Screen
Unit IP Address
Subnet Mask
4-16
W A N s u i t e 5 2 6 0 / 5 2 3 0
Selects the port's operating mode.
Values: Sync, Async
Default: Sync
Selects the type of flow control to be used if the port is asynchronous.
Values: None, Xon/Xoff, RTS/CTS
Default: None
Selects the number of bits required to make up one asynchronous character.
Values: Five, Six, Seven, Eight
Default:Eight
Sets the parity bit if the port is asynchronous.
Values: None, Odd, Even
Default: None
Selects the number of bits required to end the asynchronous character.
Values: 1, 2
Default: 1
The Current Pin Status, which shows the state of the RS-232 pins, is also
displayed on the Serial interface screens.
If you select "Ethernet" from the Interfaces screen, you will bring up an IP
Details screen (Figure 4.12) that lets you view and/or modify the IP
parameters listed below.
Figure 4.12
IP Details Screen
A unique network address assigned to this unit.
Defines the network portion of the unit's IP address.